Simplex Novus


Simplex Novus

Solid wood burning boilers for hot water central heating

Our company has been producing combustion equipment for more than 4 decades. Through our manufacturing activity, new products were born. The THERMOMETER SIMPLEX Novus solid-fired boiler is designed for hot water heating in a gravity or pumping system for homes, flats, foil houses or any other smaller facility. The boiler is a one-shot filling system with a cast iron grill structure.

  • DocumentationOpen or Close

    Simplex Novus


    User's Guide
    (Click to view it!)

  • Technical SpecificationsOpen or Close


  • DimensionsOpen or Close


  • StructureOpen or Close


  • InstallationOpen or Close

    Installation and operation can already take place in a closed heating circuit, where permitted by applicable standards in that country. In this case, however, the boiler / the connected heating system must be provided with overheating or overheating. with overpressure protection fittings!

    Recommended safety devices for closed systems:

    – Direct acting overheating valve: Regulus DBV-1
    – Safety heat exchanger + safety valve combination: WATTS STS 20 valve + DAKON heat exchanger
    – Safety (overpressure) valve: connection 3/4 ", opening value up to 2.5 bar

  • DevelopmentsOpen or Close

    The product is replaced by the previous SIMPLEX boilers, in case of replacement the heating system is not necessary. The inside of the boiler is made of 5 mm thick steel plate for better corrosion protection.

  • Important InformationOpen or Close

    Before using, be sure to read the boiler's manual!

    Never take the air out of the boiler! Closing the air vents will reduce the efficiency of combustion and operation at low temperatures will cause harmful processes, tar and condensation, which also shortens the boiler life!

    Useful article on solid fuel firing:

  • Fossil FuelOpen or Close

    With the large firebox and inlet door design, the boiler is very useful for firing boulders, briquettes and low calorific value. The moisture content of the log can be up to 15-20% to avoid tar.